学好开关电源室外一体化电源机柜,高频开关电源，-48V开关电源

我来推荐几本吧,我看过的书比较多,书名可能记得不是很清楚.但按照我提供的书名信息,在网上可以查到正确书名的.另外,我手头上还有部分书的电子版,有时间的话,我另开一贴传上来.

第2贴推荐的书,美国伦克写的,写的还算不错,但很笼统.

第一贴<开关电源入门>和三楼那个美国国家半导体总工写的书,我都看过,一般水平都算不上,垃圾的很,看了纯属浪费时间.

1、《开关电源指南》第2版,浙江大学徐德鸿翻译的,也有可能是他的学生翻译,他署名出版而已.说实话,翻译水平很烂,错误相当多,但里面很多内容,相当不错,很适合入门.英文水平高的,可以看英文原版.

2、《开关电源设计》第2版,华南理工大学王志强翻译的,挺厚的,黑白相间的书皮,也不错.

3、《电力电子系统建模》 浙大徐德鸿翻译,《开关变换器的建模与控制》, 张卫平著. 这两本书,详细讲解了开关电源的建模方式和环路补偿,怎么调整电源环路的稳态性能和暂态性能.这两本书看懂了,做电源,我个人觉得,理论水平已经达到一定高度了.

4、《直流开关电源的软开关技术》和《全桥移相软开关技术》,南航阮新波的博士论文,整理后出版的两本书,国内凡是写软开关的书,大部分都是照抄它们或者无一不参考它们.其中后一本书已经绝版了,市场上已经买不到,淘宝网上有复印版本卖,大概45元,质量很不错的.

5、《开关电源磁性元器件》,赵修科著.磁性器件,可以说是开关电源的心脏,不懂磁,想做好电源,那是不可能的.这本书对磁的理解深刻而全面.

6、control loop cookbook 德州仪器的技术资料,作者就是提出著名右半平面零点概念的那个人,相当的好.

其他的书嘛,就是大学教材,模拟电路和经典控制理论,一定是要读通掌握才行.总的来说,软开关,就看阮新波足够;环路方面,主要还是看外国人写的;磁和变压器方面,主要看赵修科和台湾人写的.

  我们某些大陆人写的书,最好不要看,纯粹是为了出书而出书,对读者一点也不付责任,一上来就是公式,怎么来的,一点推导过程也没有.照抄别人的书,直接用自己蹩脚英文翻译外国人的书,整理整理,就是自己的著作了.这就是我们大陆人,某些所谓专家学者的学术态度.

仿真软件还是要掌握一些的.

1、orcad pspice适合做电路元件级级仿真,仿模拟电路和开关电源小信号模型,效果相当好.

2、saber适合做系统级仿真,特别适合开关电源这种含有脉冲式信号的电路,模型库参数全,仿真精度高,尤其是强大的仿真结果后续处理能力,是我用过的仿真软件中,功能最强大的一款.不过,在国内普及程度,没有pspice高,一套正版8万美元,比尔盖茨都要眼红的.

3、matlab,掌握控制系统工具库就可以了,大概100左右个函数工具.开关电源的建模,零极点的补偿效果,只有用传递函数的形式在matlab中表达出来,才最清晰.经典控制理轮的时域分析、根轨迹分析与补偿法、频域分析法与补偿,matlab可以把它们直观而且准确的演示出来.

当然了,也是最重要的,就是实践!理论水平再高,不能应用于实践,也是废物一个,知识再丰富,不能转化为价值,也是空话.

实践是检验真理的唯一标准,要相信理论,相信数学,任何一个现象,都可以用数学解释.如果解释不出来,只能归结为自己理论水平不高,数学基础不扎实.一款好电源,70%靠数学计算,30%靠调试.

更要相信实践,两者相互结合,不要盲目怀疑.

（原文地址：http://wenku.baidu.com/link?url=-0ZMfvAB9Qvaf-hVao-8zhAAebuJhJYXfU4vsdWOVrltf4khOmlfewCh0A-VI3jWev0mPfdeyqdHuaXtzrh0MvySX24iv0Kb1zIznKw6ppC）

第二篇：

关于开关电源设计的书籍本人有不少，同时也收集了相应的电子档，这里共享一批，方便需要的人下载。

论坛里已有的很多电子书都比较零散，一般一个帖子才一两本书，要下载挺麻烦的，我这里初步看了下，有十本，有些是论坛没有的，都是经典，你们挑着下吧。

为了方便看帖，下面列出所传10本书的名字：（排名不分先后，按上传的顺序列出）

1，《开关电源设计》（第二版 中文）

     《开关电源设计》（第三版 英文原版   注：158楼新增中文PDF）

2，《Fundamentals of Power Electronics Second Edition》

Sanjaya Maniktala 写的三本书：

3，《精通开关电源设计》（中、英文）

4，《开关电源设计与优化》（中文）

5，《开关电源故障诊断与排除》（英文原版）

6，《实用开关电源设计》Ron Lenk

7，《开关电源设计指南（原书第二版）》

8，《变压器与电感器设计手册》（第三版）

9，《磁性元器件分册》--赵修科

10，开关电源的原理与设计（修订版）

I recommend a few books, I have read a lot of books, the title of the book may not be very clear. But according to the name of the book I provide, I can find the right title on the Internet. In addition, I have an electronic version of some books on the hand. If I have time, I will open another post.

Second the recommended books, written by the US, are not bad, but they are very general.

The first "switch power supply" and the third floor national semiconductor general worker wrote books, I have seen, the general level is not up, the garbage is very waste, it is a waste of time.

1, "switch power supply guide" second version, Zhejiang University Xu Dehong translated, also may be his student translation, he signed the publication. To be honest, the level of translation is very bad, quite a lot of mistakes, but a lot of content, very good, very suitable for introduction. English level, can look at the original English version.

2, "switching power supply design" second edition, South China University of Technology Wang Zhiqiang translated, quite thick, black and white book cover, also good.

3, "power electronic system modeling" Xu Dehong translation of Zhejiang University, "modeling and control of switch converter", and Zhang Weiping. These two books explain the modeling mode of switching power supply and loop compensation in detail, how to adjust the steady performance and transient performance of the power loop. These two books read and do power, I personally think the theoretical level It has reached a certain height.

4, the soft switching technology of DC switching power supply and the full bridge phase shifting soft switching technology, the doctoral thesis of Ruan Xinbo, two books published after sorting out, all the books written in soft switching in China, most of them are copied or no reference to them. The latter book has been out of print, the market has not been bought, Taobao network has not been bought. It's sold in a copy version, about 45 yuan, and the quality is very good.

5, "switch power magnetic components", Zhao Xiuke. Magnetic devices, can be said to be the heart of the switch power, do not understand magnetic, want to do the power, that is impossible. This book is profound and comprehensive understanding of the magnetic.

6, control loop Cookbook TI's technical information, the author is to put forward the famous right half plane zero concept of the person, quite good.

通信电源,室内通信电源机柜,室外通信电源机柜,室外壁挂通信电源机柜,室内壁挂通信电源机柜,嵌入式通信电源系统,整流模块,监控模块,BBU,RRU,逆变器,室外一体化UPS电源,UPS不间断电源,48V50AH锂电池,蓄电池,蓄电池架,蓄电池柜,蓄电池巡检仪,蓄电池连接线, 交流配电单元,直流配电单元,交流配电箱, 局端嵌入式直流远供电源系统, 远端嵌入式直流远供电源系统 ,室外一体化电源机柜,高频开关电源，-48V开关电源 

Other books, that is, college textbooks, analog circuits and classical control theories, must be read and master. In general, the soft switch is enough to see the Nguyen new wave; on the loop, it is mainly written by foreigners; the magnetic and transformer aspects are mainly written by Zhao Xiuke and Taiwan people.

It is best not to read books written by some of our mainland people. It is purely for books and books, and no responsibility for readers. One is the formula, how does it come, and there is no process of derivation. People, the academic attitude of some so-called experts and scholars.

The simulation software still needs to master a few.

1. OrCAD PSpice is suitable for circuit component level simulation, analog circuit and small signal model of switching power supply. The result is quite good.

2, saber is suitable for system level simulation. It is especially suitable for switching power supply circuit with pulse signal. The model library is full of parameters, high simulation precision, especially the ability to follow up the powerful simulation results. It is the most powerful one in the simulation software I used. However, the degree of popularity in China is not PSPICE high, and a set of positive version is beautiful.  Yuan, Bill Gates needs to be red.

3, MATLAB, mastering the control system tool library is possible, about 100 function tools. The modeling of the switching power supply and the compensation effect of the zero pole are only expressed in the form of the transfer function in the MATLAB. The time domain analysis of the classic control wheel, the root locus analysis and compensation, the frequency domain analysis and compensation, matlab can be used. To show them intuitively and accurately.

Of course, it is also the most important, it is practice! The level of theory is high, it can not be applied to practice, it is also a waste, knowledge is rich, it can not be converted into value, but also empty talk.

Practice is the only standard for testing truth. To believe in theory, to believe in mathematics and any phenomenon, it can be interpreted mathematically. If it is not explained, it can only be attributed to the low theoretical level of its own and the unsolid foundation of mathematics. A good power supply, 70% by mathematical calculation, and 30% by trial.

We must believe in practice and combine them with each other, so we should not blindly suspect.

(original address: http://wenku.baidu.com/link? Url=-0ZMfvAB9Qvaf-hVao-8zhAAebuJhJYXfU4vsdWOVrltf4khOmlfewCh0A-VI3jWev0mPfdeyqdHuaXtzrh0MvySX24iv0Kb1zIznKw6ppC)

Second:

I have a lot of books on switching power supply, and I have collected the corresponding electronic files.

Many of the electronic books in the forum are relatively scattered, a general one of the one or two books, to download very troublesome, I have a preliminary look at the next, there are ten, some are not the forum, are classic, you pick it.

For the convenience of the placard, the names of the 10 books listed below are listed below.

1, "switch power design" (second edition of Chinese)

Design of switching power supply (Third Edition English original note: new Chinese PDF on 158 floor)

2, "Fundamentals of Power Electronics Second Edition".

Three books written by Sanjaya Maniktala:

3, proficient in switching power supply design (Chinese and English)

4, "design and optimization of switching power supply" (Chinese)

5, switching power supply fault diagnosis and troubleshooting (original English version)

6, "practical switch power design" Ron Lenk

7, guidelines for the design of switching power supply (the second edition of the original book).

8, transformer and Inductor Design Manual (Third Edition)

9, "magnetic component book" - Zhao Xiuke